Technological solutions for distribution to pre-selected areas

Tiemme pumping stations are suitable components for the distribution and regulation of the temperature of the heat transfer fluid in multi-area systems.

They are usually installed in the central heating, after the generator and the hydraulic separator, and must be installed on distribution manifolds (5538/5540 series - 125 mm distance).

They are the suitable solution to serve low temperature systems, if these pumps are equipped with mixing valve, or high temperature systems.

• Complete range: available versions with direct circulation, with fixed point mixing or modulating mixing;
• Applicable on 5538/5540 series manifolds 125 mm distance;
• Equipped with ball valves with integrated thermometer, check valve on return and insulation in EPP (for heating) or PE-X (for heating/cooling);
• High efficiency circulation pump;
• Seals secured by flat stops and gaskets;
• Prepared for safety thermostat and differential by-pass (calibration range: 50÷400 mbar).